5 Oracle Database Postinstallation Tasks

5.1.1 Downloading and Installing Patches

Check the My Oracle Support (formerly OracleMetaLink) Web site for required patch updates for your installation.

To download required patches:

1. Use a Web browser to view the My Oracle Support Web site:

   https://support.oracle.com/
   

2. Log in to My Oracle Support.

   Note:

   If you are not a My Oracle Support registered user, click Register for My Oracle Support and follow the registration instructions.

3. On the main My Oracle Support page, click Patches and Updates.

4. In the Patch & Updates page, click Advanced Search.

5. On the Advanced Search page, click the search icon next to the Product or Product Family field.

6. In the Search and Select: Product Family field, select Database and Tools in the Search list field, enter RDBMS Server in the text field, and click Go.

   RDBMS Server appears in the Product or Product Family field. The current release appears in the Release field.

7. Select your platform from the list in the Platform field, and at the bottom of the selection list, click Go.

8. Any available patch updates are displayed under the Results heading.

9. Click the patch number to download the patch.

10. On the Patch Set page, click View README and read the page that appears. The README page contains information about the patch set and how to apply the patches to your installation.

11. Return to the Patch Set page, click Download, and save the file on your system.

12. Use the unzip utility provided with Oracle Database 11g Release 2 (11.2) to uncompress the Oracle patch updates that you downloaded from My Oracle Support. The unzip utility is located in the $ORACLE_HOME/bin directory.

5.2.1 Creating a Backup of the root.sh Script

Oracle recommends that you back up the root.sh script after you complete an installation. If you install other products in the same Oracle home directory, then Oracle Universal Installer updates the contents of the existing root.sh script during the installation. If you require information contained in the original root.sh script, then you can recover it from the backed up root.sh file.

5.2.2 Configuring New or Upgraded Databases

Oracle recommends that you run the utlrp.sql script after creating or upgrading a database. This script recompiles all PL/SQL modules that might be in an invalid state, including packages, procedures, and types. This is an optional step but Oracle recommends that you do it during installation and not at a later date.

To run the utlrp.sql script, follow these steps:

1. Switch the user to oracle.

2. Use the oraenv or coraenv script to set the environment for the database where you want to run the utlrp.sql script:

   • Bourne, Bash, or Korn shell:

     $ . /usr/local/bin/oraenv
     

   • C shell:

     % source /usr/local/bin/coraenv
     

   When prompted, provide the SID for the database.

3. Start SQL*Plus, as follows:

   $ sqlplus / AS SYSDBA
   

4. Start the database in restricted mode and run the utlrp.sql script:

   SQL> @?/rdbms/admin/utlrp.sql
   

5.2.3 Creating and Configuring Additional Operating System Accounts

If required, create additional operating system accounts. Users must be members of the OSDBA or OSOPER groups to connect to the database with administrator privileges.

5.2.4 Setting the NLS_LANG Environment Variable

NLS_LANG is an environment variable that specifies the locale behavior for Oracle software. This variable sets the language and territory used by the client application and the database server. It also declares the character set of the client, which is the character set of data entered or displayed by an Oracle client program, such as SQL*Plus.

5.2.5 Generating the Client Static Library

The client static library (libclntst11.a) is not generated during installation. If you want to link the applications to the client static library, you must first generate it as follows:

1. Switch the user to oracle.

2. Set the ORACLE_HOME environment variable to specify the Oracle home directory used by the Oracle Database installation, for example:

   • Bourne, Bash, or Korn shell:

     $ ORACLE_HOME=/u01/app/oracle/product/11.2.0/dbhome_1 
     $ export ORACLE_HOME
     

   • C shell:

     % setenv ORACLE_HOME /u01/app/oracle/product/11.2.0/dbhome_1
     

3. Enter the following command:

   $ $ORACLE_HOME/bin/genclntst
   

5.2.6 Guidelines for Setting Semaphore Parameters

Use the following guidelines only if the default semaphore parameter values are too low to accommodate all Oracle processes:

1. Calculate the minimum total semaphore requirements using the following formula:

   sum (process parameters of all database instances on the system) + system and other application requirements
   

2. Set semmns (total semaphores systemwide) to this total.

3. Set semmsl (semaphores per set) to 256.

4. Set semmni (total semaphores sets) to semmns/semmsl rounded up to the nearest multiple of 1024.

5.2.7 Creating a Fast Recovery Area Disk Group

During installation, by default you can create one disk group. If you plan to add an Oracle Database for a standalone server, then you should create the fast recovery area for database files.

5.2.8 Enabling and Disabling Database Options

When you install Oracle Database, some options are enabled and others are disabled. If you want to enable or disable a particular database feature for an Oracle home, then shut down the database and use the chopt tool. See Example 5-1.

The chopt tool is a command-line utility that is located in the ORACLE_HOME/bin directory. The syntax for chopt is:

chopt [ enable | disable] db_option

The possible values for db_option are described in the following table:

cd %ORACLE_HOME%
srvctl stop database -d myDb
chopt enable lbac
srvctl start database -d myDb

5.3.1 Configuring Oracle Net Services

If you have an earlier release of Oracle software installed on this system, you might want to copy information from the Oracle Net tnsnames.ora and listener.ora configuration files from the earlier release to the corresponding files for the new release.

The following sections describe about how to configure the Oracle Net Services:

• Modifying the listener.ora File

• Modifying the tnsnames.ora File

Modifying the listener.ora File

If you are upgrading from a previous release of Oracle Database, Oracle recommends that you use the current release of Oracle Net listener instead of the listener from the previous release.

If you have referenced the previous Oracle home directory names in the static listener information, then these directory names must be modified before the listener.ora file can be used in the 11.2 environment.

To use the listener from the current release, copy the static service information from the listener.ora file from the previous release to the version of that file used by the new release.

For any database instances earlier than release 8.0.3, add static service information to the listener.ora file. Oracle Database releases later than release 8.0.3 do not require static service information.

Modifying the tnsnames.ora File

Unless you are using a central tnsnames.ora file, copy Oracle Net Services names and connect descriptors from the earlier release tnsnames.ora file to the version of that file used by the new release.

If necessary, you can also add connection information for additional database instances to the new file.

5.3.2 Configuring Oracle Label Security

If you installed Oracle Label Security, you must configure it in a database before you use it. You can configure Oracle Label Security in two ways; with Oracle Internet Directory integration and without Oracle Internet Directory integration. If you configure Oracle Label Security without Oracle Internet Directory integration, you cannot configure it to use Oracle Internet Directory at a later stage.

5.3.3 Configuring Oracle Database Vault

If you install Oracle Database Vault, then you must register it in a database. Ensure that you create the Database Vault Owner and, optionally, Database Vault Account Manager administrative accounts before you can use it.

5.3.4 Configuring Oracle Messaging Gateway

To configure Oracle Messaging Gateway, see the section about Messaging Gateway in Oracle Streams Advanced Queuing User's Guide. When following the instructions listed in that guide, see this section for additional instructions about configuring the listener.ora, tnsnames.ora, and mgw.ora files.

5.3.5 Configuring Oracle Precompilers

This section describes postinstallation tasks for Oracle precompilers:

• Configuring Pro*C/C++

• Configuring Pro*FORTRAN

5.3.6 Configuring Secure Sockets Layer

Oracle recommends that you configure and use a Secure Sockets Layer (SSL) to ensure that passwords and other sensitive data are not transmitted in clear text in HTTP requests.

5.3.7 Installing Oracle Text Supplied Knowledge Bases

An Oracle Text knowledge base is a hierarchical tree of concepts used for theme indexing, ABOUT queries, and deriving themes for document services. If you plan to use any of these Oracle Text features, then you can install two supplied knowledge bases (English and French).

5.3.8 Configuring or Reinstalling Oracle XML DB

See Oracle XML DB Developer's Guide for more information about the following tasks:

• Reinstalling Oracle XML DB

• Configuring or customizing the Oracle XML DB tablespace

• Configuring FTP, HTTP/WebDAV port numbers

5.3.9 Configuring and Using Direct NFS Client

Many Oracle products and options must be configured before you use them for the first time. Before using individual Oracle products or options, see the appropriate guide in the product documentation library.

nfs_server:/vol/DATA/oradata /home/oracle/netapp nfs\
rw,bg,hard,nointr,rsize=32768,wsize=32768,tcp,actimeo=0,vers=3,timeo=600

5.4.1 Migrating User Settings from Release 1.0

The first time you start SQL Developer after installing it or after adding any extensions, you are asked if you want to migrate your user settings from a previous release. (This occurs regardless of whether there was a previous release on your system.)

These settings refer to database connections, reports, and certain SQL Developer user preferences that you set in a previous version by clicking Tools and then Preferences. However, some user preferences are not saved, and you must provide them again using the new release.

To migrate your user settings from SQL Developer release 1.0:

1. Unzip the release 1.1 kit into an empty directory (folder). Do not delete or overwrite the directory into which you unzipped the release 1.0 kit.

2. When you start SQL Developer release 1.1, click Yes when prompted to migrate the settings from a previous release.

3. In the dialog box that is displayed, do not accept the default location for the settings. Instead, provide the location of your release 1.0 settings, which might be a folder whose path ends with sqldeveloper/jdev/system.

5.4.2 Migrating Information from Previous Releases

If you used a previous release of SQL Developer or a prerelease version of the current release, and you want to preserve the database connections that you were using, then save your existing database connections in an XML file. To save the connections, right-click the Connections node in the Connections Navigator and select Export Connections. After you complete the installation described in this guide, you can use those connections by right-clicking the Connections node in the Connections Navigator and selecting Import Connections.

If you want to use any user-defined reports or the SQL history from a previous version, see "Location of User-Related Information" for information about where these are located. If you want to use any user-defined reports or the SQL history from release 1.0 with both releases 1.0 and 1.1, you must save them before using release 1.1, because release 1.1 modifies the files to a format that is incompatible with release 1.0.

SQL Developer preferences (specified by clicking Tools and then Preferences) from a prerelease version of the current release cannot currently be saved and reused; you must provide any desired preferences again.

5.4.3 Location of User-Related Information

SQL Developer stores user-related information in several places, with the specific location depending on the operating system and certain environment specifications. User-related information includes user-defined reports, user-defined code examples, SQL Worksheet history, and SQL Developer user preferences.

The user-related information is stored outside the SQL Developer installation directory hierarchy, so that it is preserved if you delete that directory and install a new version. This information is stored in or under the SQLDEVELOPER_USER_DIR location, if defined; otherwise as indicated in the following table.

Table 5-2 shows the typical default locations (under a directory or in a file) for specific types of resources on different operating systems. Note the period in the name of any directory or folder named .sqldeveloper.

SQL Worksheet archive files contain SQL statements that you have entered. These files begin with sqldev and then have a random number (for example, sqldev14356.sql). If you close SQL Developer with a SQL Worksheet open that contains statements, then you will be prompted to save these files.

To specify a nondefault SQLDEVELOPER_USER_DIR location, do either of the following:

• Set the SQLDEVELOPER_USER_DIR environment variable to specify another directory path.

• Edit the sqldeveloper_install\sqldeveloper\sqldeveloper\bin\sqldeveloper.conf file and substitute the desired directory path for SQLDEVELOPER_USER_DIR in the following line:

  SetUserHomeVariable SQLDEVELOPER_USER_DIR
  

If you want to prevent other users from accessing your user-specific SQL Developer information, you must ensure that the appropriate permissions are set on the directory where that information is stored or on a directory preceding it in the path hierarchy. For example, you may want to ensure that the ~/.sqldeveloper directory is not worldreadable.