70 DBMS_FLASHBACK

Overview

DBMS_FLASHBACK provides an interface for the user to view the database at a particular time in the past, with the additional capacity provided by transaction back out features that allow for selective removal of the effects of individual transactions. This is different from a flashback database which moves the database back in time.

When DBMS_FLASHBACK is enabled, the user session uses the Flashback version of the database, and applications can execute against the Flashback version of the database.

You may want to use DBMS_FLASHBACK for the following reasons:

• Self-service repair: If you accidentally delete rows from a table, you can recover the deleted rows.

• Packaged applications such as email and voicemail: You can use Flashback to restore deleted email by re-inserting the deleted message into the current message box.

• Decision support system (DSS) and online analytical processing (OLAP) applications: You can perform data analysis or data modeling to track seasonal demand.

Security Model

To use this package, you must have the EXECUTE privilege on it.

Types

The DBMS_FLASHBACK package uses these types:

Exceptions

Operational Notes

DBMS_FLASHBACK is automatically turned off when the session ends, either by disconnection or by starting another connection.

PL/SQL cursors opened in Flashback mode return rows as of the flashback time or SCN. Different concurrent sessions (connections) in the database can perform Flashback to different wall-clock times or SCNs. DML and DDL operations and distributed operations are not allowed while a session is running in Flashback mode. You can use PL/SQL cursors opened before disabling Flashback to perform DML.

Under Automatic Undo Management (AUM) mode, you can use retention control to control how far back in time to go for the version of the database you need. If you need to perform a Flashback over a 24-hour period, the DBA must set the undo_retention parameter to 24 hours. This way, the system retains enough undo information to regenerate the older versions of the data.

You can set the RETENTION GUARANTEE clause for the undo tablespace to ensure that unexpired undo is not discarded. UNDO_RETENTION is not in itself a guarantee because, if the system is under space pressure, unexpired undo may be overwritten with freshly generated undo. In such cases, RETENTION GUARANTEE prevents this. For more information, see the Oracle Database Administrator's Guide.

In a Flashback-enabled session, SYSDATE is not affected; it continues to provide the current time.

DBMS_FLASHBACK can be used within logon triggers to enable Flashback without changing the application code.

Examples

The following example illustrates how Flashback can be used when the deletion of a senior employee triggers the deletion of all the personnel reporting to him. Using the Flashback feature, you can recover and re-insert the missing employees.

DROP TABLE employee;
DROP TABLE keep_scn;

REM -- Keep_scn is a temporary table to store scns that we are interested in

CREATE TABLE keep_scn (scn number); 
SET ECHO ON 
CREATE TABLE employee ( 
   employee_no   number(5) PRIMARY KEY, 
   employee_name varchar2(20), 
   employee_mgr  number(5) 
      CONSTRAINT mgr_fkey REFERENCES EMPLOYEE ON DELETE CASCADE, 
   salary        number, 
   hiredate      date 
); 

REM -- Populate the company with employees
INSERT INTO employee VALUES (1, 'John Doe', null, 1000000, '5-jul-81'); 
INSERT INTO employee VALUES (10, 'Joe Johnson', 1, 500000, '12-aug-84'); 
INSERT INTO employee VALUES (20, 'Susie Tiger', 10, 250000, '13-dec-90'); 
INSERT INTO employee VALUES (100, 'Scott Tiger', 20, 200000, '3-feb-86'); 
INSERT INTO employee VALUES (200, 'Charles Smith', 100, 150000, '22-mar-88'); 
INSERT INTO employee VALUES (210, 'Jane Johnson', 100, 100000, '11-apr-87'); 
INSERT INTO employee VALUES (220, 'Nancy Doe', 100, 100000, '18-sep-93'); 
INSERT INTO employee VALUES (300, 'Gary Smith', 210, 75000, '4-nov-96'); 
INSERT INTO employee VALUES (310, 'Bob Smith', 210, 65000, '3-may-95'); 
COMMIT; 

REM -- Show the entire org
SELECT lpad(' ', 2*(level-1)) || employee_name Name 
FROM employee 
CONNECT BY PRIOR employee_no = employee_mgr 
START WITH employee_no = 1 
ORDER BY LEVEL; 

REM -- Sleep for a short time (approximately 10 to 20  seconds) to avoid 
REM -- querying close to table creation

EXECUTE DBMS_LOCK.SLEEP(10);

REM -- Store this snapshot for later access through Flashback
DECLARE 
I NUMBER; 
BEGIN 
I := DBMS_FLASHBACK.GET_SYSTEM_CHANGE_NUMBER; 
INSERT INTO keep_scn VALUES (I); 
COMMIT; 
END;
/

REM -- Scott decides to retire but the transaction is done incorrectly
DELETE FROM EMPLOYEE WHERE employee_name = 'Scott Tiger'; 
COMMIT; 

REM -- notice that all of scott's employees are gone 
SELECT lpad(' ', 2*(level-1)) || employee_name Name 
FROM EMPLOYEE 
CONNECT BY PRIOR employee_no = employee_mgr 
START WITH employee_no = 1 
ORDER BY LEVEL; 

REM -- Flashback to see Scott's organization
DECLARE 
   restore_scn number; 
BEGIN 
   SELECT  scn INTO restore_scn FROM keep_scn; 
   DBMS_FLASHBACK.ENABLE_AT_SYSTEM_CHANGE_NUMBER (restore_scn); 
END; 
/ 

REM -- Show Scott's org.
SELECT lpad(' ', 2*(level-1)) || employee_name Name 
FROM employee 
CONNECT BY PRIOR employee_no = employee_mgr 
START WITH employee_no = 
   (SELECT employee_no FROM employee WHERE employee_name = 'Scott Tiger') 
ORDER BY LEVEL; 

REM -- Restore scott's organization.
DECLARE 
   scotts_emp NUMBER; 
   scotts_mgr NUMBER; 
   CURSOR c1 IS 
      SELECT employee_no, employee_name, employee_mgr, salary, hiredate 
      FROM employee 
      CONNECT BY PRIOR employee_no = employee_mgr 
      START WITH employee_no = 
         (SELECT employee_no FROM employee WHERE employee_name = 'Scott Tiger'); 
   c1_rec c1 % ROWTYPE; 
BEGIN 
   SELECT employee_no, employee_mgr INTO scotts_emp, scotts_mgr FROM employee 
   WHERE employee_name = 'Scott Tiger'; 
   /* Open c1 in flashback mode */
   OPEN c1; 
   /* Disable Flashback */
   DBMS_FLASHBACK.DISABLE; 
 LOOP 
   FETCH c1 INTO c1_rec; 
   EXIT WHEN c1%NOTFOUND; 
   /*
     Note that all the DML operations inside the loop are performed
     with Flashback disabled
   */
   IF (c1_rec.employee_mgr = scotts_emp) then 
      INSERT INTO employee VALUES (c1_rec.employee_no, 
         c1_rec.employee_name, 
         scotts_mgr, 
         c1_rec.salary, 
         c1_rec.hiredate); 
   ELSE 
   IF (c1_rec.employee_no != scotts_emp) THEN 
   INSERT INTO employee VALUES (c1_rec.employee_no, 
         c1_rec.employee_name, 
         c1_rec.employee_mgr, 
         c1_rec.salary, 
         c1_rec.hiredate); 
      END IF; 
    END IF; 
 END LOOP; 
END; 
/ 

REM -- Show the restored organization.
select lpad(' ', 2*(level-1)) || employee_name Name 
FROM employee 
CONNECT BY PRIOR employee_no = employee_mgr 
START WITH employee_no = 1 
ORDER BY LEVEL; 

DISABLE Procedure

This procedure disables the Flashback mode for the entire session.

DBMS_FLASHBACK.DISABLE;

EXECUTE dbms_flashback.enable_at_time('30-AUG-2000');
SELECT salary FROM emp where name = 'Joe'
EXECUTE dbms_flashback.disable;

ENABLE_AT_SYSTEM_CHANGE_NUMBER Procedure

This procedure takes an SCN as an input parameter and sets the session snapshot to the specified number. In the Flashback mode, all queries return data consistent as of the specified wall-clock time or SCN. It enables Flashback for the entire session.

DBMS_FLASHBACK.ENABLE_AT_SYSTEM_CHANGE_NUMBER (
   query_scn IN NUMBER);

ENABLE_AT_TIME Procedure

This procedure enables Flashback for the entire session. The snapshot time is set to the SCN that most closely matches the time specified in query_time.It enables Flashback for the entire session.

DBMS_FLASHBACK.ENABLE_AT_TIME (
   query_time   IN TIMESTAMP);

GET_SYSTEM_CHANGE_NUMBER Function

This function returns the current SCN as an Oracle number datatype. You can obtain the current change number and store it for later use. This helps you retain specific snapshots.

DBMS_FLASHBACK.GET_SYSTEM_CHANGE_NUMBER
 RETURN NUMBER;

TRANSACTION_BACKOUT Procedures

This procedure provides a mechanism to back out a set of transactions. The user can call these procedures with either transaction names or transaction identifiers (XIDS).

The procedure analyzes the transactional dependencies, perform DMLs and generates an extensive report on the operation performed by the subprogram. This procedure does not commit the DMLs performed as part of transaction back out. However it holds all the required locks on rows and tables in the right form, so that no other dependencies can enter the system. To make the changes permanent you must explicitly commit the transaction.

A report is generated in the system tables DBA_FLASHBACK_TRANSACTION_STATE and DBA_FLASHBACK_TRANSACTION_REPORT.

DBMS_FLASHBACK.TRANSACTION_BACKOUT
   numtxns            NUMBER,
   xids               XID_ARRAY,
   options            NUMBER default NOCASCADE, 
   timeHint           TIMESTAMP default MINTIME);

DBMS_FLASHBACK.TRANSACTION_BACKOUT
   numtxns            NUMBER,  
   xids               XID_ARRAY, 
   options            NUMBER default NOCASCADE,
   scnHint            TIMESTAMP default 0   );

DBMS_FLASHBACK.TRANSACTION_BACKOUT
   numtxns           NUMBER,
   txnnames          TXNAME_ARRAY,
   options           NUMBER default NOCASCADE,
   timehint          TIMESTAMP MINTIME );

DBMS_FLASHBACK.TRANSACTION_BACKOUT
   numtxns           NUMBER, 
   txnNames         TXNAME_ARRAY, 
   options          NUMBER default NOCASCADE,
   scnHint          NUMBER 0);